A heat pump is a technology that has both heating and cooling in one unit that can save you money. It is a fairly inexpensive unit that can be easy for the do-it-yourselfer to install if they have any DIY experience at all. Heat pumps move heat around to keep you cooler in summer and warmer in winter.
You can hire someone to do install your heat pump, there are plenty of technicians that can do it. You can call an expert from Heat pump installation Toronto. You can read on if you want to know more about heat pump installation , there are articles online which share good information which you can learn and get tips from.
There are also videos that can show you how to install the heat pump on your own. You can research one or two videos and get a really good idea of how to do it. Before too long, you can be an expert at installing heat pumps with just a little work.
- Pick a Heat Pump – you will first need to pick a heat pump that will fit your home and your space. You will need one that will fit into the space of your old furnace so that all the pipes and vents will match. You might have to adapt it to fit, but even this isn’t too big of a problem if you have any skills at all.
- Remove Old Furnace – you will need to make sure that you have the gas and electricity turned off before you attempt this step. Then you can cut the old pipes and unscrew all the screws that need it. It won’t take you too long to remove the old furnace because it isn’t that difficult to do.
- Adapt Ductwork – you might need to adapt any ductwork that is already there – sometimes the old ductwork will work perfectly and you won’t need to do many adaptations. Other times, there will be a lot to do to make it all match up and work properly. You can adapt the ductwork by using sheet metal, silver reinforced tape, and sheet metal tools such as shears, angle grinder, and self-piercing screws. Here is a list of tools and equipment that you might need: https://www.hvachowto.com/tools-needed-for-a-diy-mini-split-install/. You might need all of it, but it is good to have it just in case.
- Fit in the New Heat Pump – the heat pump is heavy, so you have to take that into consideration before you do this step. You just need to screw the heat pump into the ductworks and then seal the joints with silver tape. It won’t take you too long to do this step, especially if you have help to lift it.
- Place the Outdoor Unit – you will want to place the outdoor unit somewhere near where you put the indoor unit. This part is extremely heavy, as well, so have a dolly and a friend to help you lift it. It needs to be placed as close as possible to the heat pump so that you can add a shorter lineset. This will save you time and money as you install the lineset.
- Install the Lineset – this is a difficult step because the lineset is bulky and hard to work with. You will unroll it and straighten it out. You will also need to drill a hole about 4” around to feed the lineset into. This will connect the heat pump and the outdoor unit together and allow them to work together. Look here to see what a lineset is. This site will help you to learn a little more about it.
- Run Electrical Wires – this can be tricky, so if you’re not sure what you’re doing, hire an electrician. You will need a variety of different size wires that do different jobs in the heat pump. You will want to hook all the wiring up to the breaker panel as a final step.
- Turn it On – the last step that you need to take is to turn the unit on. If it works, you did a great job and you can now enjoy the perfect temperature in your home. If it doesn’t work, go through each step to see what you did wrong. If you can’t find what is wrong, you might want to call in a professional.
Installing a heat pump is not that difficult for anyone that has any DIY skills. It is a lot of work, but it is very doable for most people. If you are not confident in your skills, call a professional and let them do the work. Just be aware that it will cost you two to three times as much to have a professional do the job.